* This Windows XP was tested on a Intel Pentium 4 1,2 GHz Laptop and on a Intel Core 2 Duo 2,2 GHz Laptop.
* Unattended Installation with Prompt repair + Working WGA Keys and Windows Genuine Advantage Crack included and no Windows Activation needed.
* All Official and some Unofficial Windows XP Service Pack 3 Updates are included till 2010.2.9.
* Over 200 MB SATA/ACHI and extra LAN & WLAN drivers already integrated.
* It's possible to install this Windows XP on a USB flash drive or USB Hard disk drive.
* A lot of Windows XP settings have been already set.
* Booting and Running is a little bit faster than a standard Windows XP, because some worthless Windows XP Files and Programs are removed and all Windows XP Updates are slipstreamed.
* Codec Packs included to Decode and Encode almost all Audio and Video formats with Video Thumbnails support.
* After the Windows XP Installation is finished it is possible choose if the Preconfigured Windows XP Settings and the Extra Programs should be implemented, if nothing has been chosen in 60 seconds then the option Yes will be automatically selected.
(o) Important Infos:
* This Windows XP is not for Upgrading, you must make a clean installation on a formatted Hard disk drive or Partition.
* Some Virtual Machine Programs will overwrite an important Config file (WINNT.SIF) with the standard program settings and this will result that the Extra Programs and Custom Settings will not be implemented and you will be asked to enter a Key. If you have this problem use a Key from the file "Working WGA Keys.txt" that is on your Burned Optical Disc or open the ISO file with a Program like 7-zip and AFTER Windows XP has been installed start the file "Auto Setup.bat" in the folder "(Optical Disc)OEMRunOnce". I recommend to use the Program VirtualBox at "http://www.virtualbox.org" this Program is free and is available for almost all Operating Systems and it will not mess around with any Windows config files.
* It is possible to add Extra Programs and Custom Settings that will be automatically implemented after the Windows XP installation is finished by editing the setting files (Open with notepad) in "(source)OEMRunOnce" folder. After the file "Auto Setup.bat" has been run the Config files can then be also found in "(System Drive)Documents and SettingsCustom Settings" folder. If a settings file has been edited then the file must be run and the Computer must be restarted for the changes to take effect.
* If you try to install Windows XP and your Hard disk drive doesn't get detected or you get a Bluescreen after the first Windows XP loading screen then this normally means that the SATA driver for your Hard disk drive is missing, these steps here should help you to fix this problem:
1. If you get a Bluescreen then try to disable the SATA/ACHI option or set the SATA mode to IDE in your BIOS. If Windows XP starts now then install your SATA/ACHI driver, restart your Computer and change your BIOS SATA setting back.
2. If you get a Bluescreen or your Hard disk drive doesn't get detected, put the SATA driver on a Floppy Disk and use the F6 (Floppy Disk) option that comes up if you have booted Windows XP from the Optical Disc.
3. If you have no Floppy Disk Drive then use nLite at "http://www.nliteos.com" to integrate your SATA Driver directly into the Windows XP source. For more infos how to do this take a look at "http://news.softpedia.com/news/Install-Windows-XP-On-SATA-Without-a-Floppy-F6-47807.shtml".
* If you want to be sure if the integrated SATA driver work with your Computer then use the Program VirtualBox to test it at "http://www.virtualbox.org" and set the Virtual Hard disk drive in VirtualBox form IDE to SATA and VirtualBox will then clone your SATA Controller.
(o) Infos on how to install Windows XP from a USB Flash drive:
1. Make a new folder on your Hard disk drive and called it "WINXPCD".
2. Open the file "Windows XP Professional 32-bit en-US - Black Edition v201X.XX.XX.iso" whit a Zip Program like 7-Zip and extract all the files into the folder "WINXPCD".
3. Delete the folder "[BOOT]" from the "WINXPCD" folder.
4. Go to the folder "WINXPCDI386" and open the file "WINNT.SIF" with a text editor and copy this command line to the bottom of the text file:
Command1="SSA /BootINIGenerate /UnrenameFolders /PendingDelete"
5. Now download the Program WinToFlash form the WebSite "http://www.wintoflash.com/home/en/" and install it.
6. Start the WinToFlash Program and the Wizard will now help you to do the rest.
7. Check in your BIOS if the option USB Booting is enabled and if the USB Boot Priority is set above the Hard disk drive.
* If the Preconfigured Windows XP Settings and the Extra Programs are not implemented then go to your USB Flash drive folder "OEMRunOnce" and start the file "Auto Setup.bat".
(o) Infos for Newbies:
* Minimum System Requirements is 600 MHz Processor, 256 MB RAM, 4 GB Hard disk Space, Super VGA (800x600) Video Adapter.
* Quick Guide how to install Windows XP new:
<- Step 1 Prepare ->
1. BACKUP YOUR FILES FIRST and then download all the up-to-date Drivers for your Computer.
2. Select in your Burn Program the option for Burning an Image file to a Disc, and select the file "Windows XP Professional 32-bit en-US - Black Edition v201X.XX.XX.iso" and Burn the Disc at a slow speed to avoid missing file errors when Windows XP gets installed. If you need a good Burn Program i recommend the free ImgBurn at "http://www.imgburn.com".
3. Go to your Mainboard or Computer manufacturer Website and look if there is a new BIOS update or an extra BIOS for Windows XP, if there is then update it. (This step can be skipped but is not recommended.)
<- Step 2 Install ->
4. Put your burned Windows XP Disc in your Optical Disc Drive and then turn your Computer off.
5. Start your Computer and in a few seconds you should see the text "Press any Key to boot from the CD." if you see this then you should press a Key on your Keyboard. If you don't get this message then you must set in your BIOS the Optical Disc drive Boot Priority above the Hard disk drive.
6. Wait until Windows XP has loaded the drivers then press the "ENTER" Key on your Keyboard and then the "F8" Key and then the "ESC" Key.
7. Now select the Hard disk drive where you want to install Windows XP (Default is "C:") and press the Key "D" on your Keyboard and then the Key "ENTER" and then the Key "L".
8. Now select the same Hard disk drive again and press the Key "ENTER" on your Keyboard and now select the option "Format the partition using the NTFS file system (Quick)" and then press the "ENTER" Key.
<- Step 3 set-up System ->
9. If Windows XP is installed go to "START -> Control Panel -> Regional and Language Options" and click all the options you can find there and change all Regional and Language settings to your Regional and Language you want to use.
10. Now you need only to install your Up-to-Date Computer Drivers and you are DONE :) If you can't find all the Up-to-Date drivers for your Computer then use the Program RadarSync at "http://www.radarsync.com/software/s176591-radarsync_free_version". But it is not recommended to use programs like this mostly they give you wrong drivers and can mess up your Computer. Better you look what WLAN Card, LAN Card, Sound Card, Graphic Card ... model you have in your Computer and then look in google for the Card manufacturer websites and download the Up-to-Date drivers form there.
* If you are missing same Programs like Microsoft Paint or Microsoft Outlook then take a look in the Favorites folder. There you will find Website Links to better Programs and a lot more.
* To change the Windows XP Key after Windows XP is installed use the Tool "Keyfinder (Key Changer) v1.51.exe" that is on your Burned Optical Disc or open the ISO file with a Program like 7-zip. You can also change the Windows XP Owner and Company with the "Keyfinder (Key Changer) v1.51.exe" Tool.
* If you get a virus warning about the file "Keyfinder (Key Changer) v1.51.exe" this is normal because all AntiVirus Programs are detecting Key Changers (Hack Tools) as a virus.
* If you have a question or a problem use Google or go to this Website "http://www.msfn.org" but don't expect that someone will help you if the solution for your question can be found in 10 minutes in Google or over the forum search.
Note:
"Gunakan aplikasi uTorrent untuk men-download file ini, bila anda tidak mempunyai aplikasi uTorrent maka anda harus men-instalasi aplikasi ini (download uTorrent di sini). Untuk mendownload file torrent anda tidak usah khawatir apabila jaringan anda terputus ketika anda dalam keadaan mendownload file ini, karena uTorrent akan meresume download tersebut dari ketika koneksi anda terputus, jadi bukan mendownload file dari pertama kembali melainkan dari ketika anda terputus dari internet. Kalaupun anda mendownload file yang berukuran besar yang membutuhkan waktu berjam jam atau mungkin berhari hari, anda tidak usah khawatir untuk mematikan PC anda untuk istirahat karena file yang anda download akan di resume oleh uTorrent dari ketika anda memutus koneksi dari internet".
Download Now!
Post a Comment